Language

FOLLOWS:

winding tester

Home » Products » Textile slitting and rewinding machine » winding tester

winding tester

  • https://www.shmengji.com//img/mj_190_inspection_and_winding_machine_for_grey_fabric.jpg
  • https://www.shmengji.com//upfile/2017/08/12/20170812160837_860.jpg
  • https://www.shmengji.com//upfile/2017/08/12/20170812160845_623.jpg
  • https://www.shmengji.com//upfile/2017/08/12/20170812160852_171.jpg

MJ-190 Inspection and Winding Machine for Grey Fabric

Applications

It is suitable for inspecting &winding of fabrics including textile, dying & finishing, clothing, knit, warp knitting, low-weight non-woven fabric etc.

Contact Us >>
  • Description
  • Specifications
  • Accessories
  • Machine configuration
  • INQUIRY
1) It is used for inspection and rolling of all kinds of chemical fabric, cotton or intertexture grey cloth and finished fabric
2) It adopts the combination of VF for speeding governing and gear reducer, magnetic particle clutch for controlling tension, assembling electronic length counter and infrared ray side flushing.
3) It could add side sucking device and imported mechanical stopwatch.

Model

MJ-190

Applicable width

1800mm-3600mm(Optional)

Winding diameter

≤480mm

Roll inspecting speed

0-100m/min(Frequency controlled  speed )

Type of deviation correction

Machinery

Main motor power

1.5(Kw)-3(Kw)

Tension controlling

inverter + inverter

Machine power

≤4Kw

Type of tension control

VFD + magnetic Particle, VFD+VFD

Machine standard out size

2800mm*1700mm*1900 mm

1

PLC

2

All of Bearing

3

Magnetic particle brake

4

Frequency converter

5

Screen

6

Switch Button

7

AC contactor

8

Auxiliary relay

9

Traction motor

10

Rewinding motor

1.Unwinding and rewinding unit :
(1)Machine shelf adopts cast quality steel plate
(2)Loading type: Normal machinery lifting, manual
(3)Adopt dual VF to control tension

2.Inspection machine part  
(1)Test table is made of black plate support.
(2)According to user needs, the table can be equipped with down light inspection and ivory acrylic board, so that more clear and correct in the test.  

3.Traction device:  
(1)Structure style: active traction and passive press fasten style
(2)Traction roller is steel roller
(3)Traction motor adopts servo motor 3 kw
(4)Length can be adjust

4.Material delivery structure:
(1)Adopt motor and shift gears combination ways  
(2)Main motor: speed adjusted by transducer  
(3)Drive style: drove by main motor and traction through active roller
(4)Transmission: adopts triangle belt and belt wheel together structure

5.Control part:
(1)Control system: Main machine control, tension control, adjusting control
(2)Main machine control:Main motor control, traction control, material delivery control
(3)Tension control :Unwind tension, the speed of control scope is wide, good performance whatever the speed
(4)Electrical meter counting, alarm stop, auto length-position functions   

6.Edging device:
(1)Hydraulic system: adjust the pressure by overflow valve
(2)Automatic infrared photoelectric device

7.Other Condition:    
(1)Power supply: 380V / 50HZ (can be made according to users)

Menu