intelligent high precision crosscutting machine

Home » Products » Nonwoven slitting machine » intelligent high precision crosscutting machine

intelligent high precision crosscutting machine


MJ-HQJD Full Automatic nonwoven slitting machine


All kinds of paper, film, paper-plastic composite, cloth, leather, PVC, PET and other large drum truncation of packaging materials.

Contact Us >>
  • Description
  • Specifications
  • Accessories
  • Machine configuration
1.Main engine frequency adjust speed, PLC touch screen control system, auto counter quantity, auto fixed length, auto machine stop when had alarm, auto tension control etc. function.
2.Feeding roll use auto loading system(160#cylinder), air shaft use 3inch (76mm paper tube core)
3.Machine rock use 12mm thick steel plate with groove steel structure. Bottom of cutting knife use heavy casting structure, Guide rollers using static balanced aluminum alloy guide roller.
4.Traction drive fixed position use servo motor system, traction driver roller use steel structure. Feeding traction way is through motor move the chain wheel to drag the rubber roller. The receiving platform is normal automatic finished materials table, control by motor.



Max. Diameter of Unwinding


Max. Cutting Width


Max. Unwinding Roll Width


Cutting Length


Cutting Machinery Speed


Stable Working Speed

150-170 pcs per minutes

Cutting Precision


Height of Stacking


Total Power


Machine Size(L*W*H)




10-19 wrench




Adjustable wrench


Oil gun


Allen wrench


Operating manual


Inverter manual


Rack horizontal pad


Extra Cool Knives


1. Unwinding Unit:
1)Machinery rock use steel plate and casting steel structure.
2)Automatic magnetic tension control system  
3)Control way:through PLC tape control way(Panasonic Japan)
4)Tension control range:3-100KG
5)Tension magnetic use 10KG controller
6)Unwinding shaft use air shaft type
7)Driver roller use aluminum roller, through static balanced aluminum alloy guide roller.
8)Base material position can be adjust.
9)Automatic loading equipment structure system
10)Unwinding use photocell control edge position control system(EPC) (WUXI)

2. Main Engine Unit
(1)Machinery rock use 12# high quality steel plate structure.

1)Traction Unit:
(1)Structure type: driver roller drag passive pinch roller
(2)Traction base use casting structure(1set)
(3)Traction roller use rubble roller
(4)Compression way control by cylinder
(5)Driver roller use aluminum roll
(6)Driver roller can be up and down adjust
(7)Adjust way: manual adjust control by handle wheel
(8)Motor use frequency adjust speed
(9)Frequency use V&T brand
(10)Feeding use arm holding material buffering mechanism.
(11)Float roller up and down tension use pneumatic traction way
(12)Float roller use aluminum roll
(13)Whole feeding structure control by sense

2)Feeding Material Unit
1.Fixed length control by Servo Motor
2.3 kw Invt motor brand (1pcs)
3.Whole machine project control system use digital project system driving way; main motor drive the roller to fixed position
4.Drive by synchronous belt and synchronous wheel transmission mechanism.
5.Feeding roll use rubble roller structure(bottom roller use steel roller)

3)Cutting Unit:
(1)Cutting way: bottom cutter fixed, Top cutter make cutting
(2)Bottom cutter use heavy casting structure
(3)Linear guide way (2pcs)
(4)Oil box  (2pcs)
(5)Lubricating oil can be recycled
(6)Bottom &Top cutter use special import bar balance steel cutter
(7)Cutter(1pcs Shanghai joint venture)
(8)Operation way: adjust cutter position by manual
(9)Main drive way: Main motor drive to match the eccentric wheel transmission linkage rod reciprocates cutter
(10)Main motor use frequency adjust motor(1pcs Shanghai brand)
(11)Frequency use V&T brand
(12)Drive use synchronous wheel drive structure
(13)Eccentric wheel (2set)
(14)Connecting rod (2pcs)

4) Slitting unit:
(1)Slitting way: active bottom of knife ,drag the up of knife to slitting
(2) Use round knife structure (5Set)
(3) Up of down roller use hollow steel roller
(4)Up of round knife use Shanghai Shenglong tool company (Spec: φ50×14.2×105mm) can freely adjust
(5) Bottom of knife use steel roller
(6) Bottom of round knife use shanghai Shenglong Tool Company. (Spec:φ60×14.2×80mm)stereotypes adjusting sleeve(customer need provide product Spec)
(7)Slitting Precision:±0.2mm
(8)Driver way: use chain and feeding roller linkage.
(9)Operation way:Manual adjust knife position
(10)Scrap material handling devices using the blower to blow.

3 Electrical control unit :( machine control by PLC project control system (PLC use Japan, touch screen use Taiwan)
(1)The machine control system can be divided into computer control, tension control.
(2)Computer control: including the main motor control, traction control, feed control, cutting control.
(3)Tension control: rewinding tension, speed control of a wide range, regardless of low speed have good performance. And feeding a floating tension control.
(4)With electronic meter count; machine alarm stop; automatic fixed length
(5)Use delixi brand electric components and France Schneider switch

4 Concerned accessories:
(1)Supply Voltage 380V / 50HZ 3Phase
(2)Air compressor:1.1L air output/ cube

Contact Form